300ZX(Z31) Information
The Nissan 300ZX, also known as the Z31, is the 3rd generation of the Nissan Z-car lineup. The Z31 was offered in both two-seater and four-seater versions, and came with a variety of engine options, including a 3.0-liter V6 and a turbocharged version of the same engine. The Z31 was praised for its sharp handling and sleek design, and has since become a beloved classic among car enthusiasts. If you're interested in learning more about the Z31 and its specifications, this page is the perfect place to start.
Table of Contents
Basic Z31 Information
Anti-sway Bar Specifications
Front Anti-Sway Bar information
| Part Number | Anti-Sway Bar Size | Year | Trim |
| 54611-Z3100 | 22mm |
12/1983 - 03/1984 09/1985 - 09/1986
|
Turbo 50th Anniversary |
| 54611-Z3100 | 22mm |
1986 1984 - 09/1985 |
Non-Turbo Turbo / Non-Turbo |
| 54611-Z31003 | 22mm | 1987 - 1989 | Non-Turbo |
| 54611-Z31004 | 24mm |
09/1986 - 01/1988 01/1988+ |
Turbo |
| 54611-Z31005 | 24mm | 01/1988+ | Shiro |
Rear Anti-Sway Bar information
| Part Number | Anti-Sway Bar Size | Year | Trim |
| 56230-Z31001 | 22mm |
1984 - 04/1987 04/1987+ |
All Non-Turbo |
| 56230-Z31002 | 24mm | 04/1987 - 01/1988 | Turbo |
| 56230-Z31003 | 26mm | 01/1988+ | Shiro |
Camshaft Specifications
OEM Camshaft Information
| Manufacture | Intake Duration | Exhaust Duration | Intake Cam Lift | Exhaust Cam Lift |
| Stock US Z31 (7/83 - 7/87) | 252 or 193 @ 0.050" | 252 or 193 @ 0.050" | 0.393" | 0.393" |
| Stock US Z31 (8/87+) | 248 or 189 @ 0.050" | 248 or 192 @ 0.050" | 0.393" | 0.393" |
| J-Spec | 252 or 193 @ 0.050" | 252 or 193 @ 0.050" | 0.393" | 0.393" |
| Euro Spec | 264 | 262 | 0.393" | 0.393" |
| NISMO Spec | 264 | 262 | 0.393" | 0.393" |
| US VG30 "Truck" spec (D21, WD21, and J30) | 248 or 189 @ 0.050" | 248 or 192 @ 0.050" | 0.393" | 0.393" |
| US VG33 Spec (All models) | 240 | 244 | 0.366 | 0.366" |
Aftermarket Camshaft Specifications
Colt Cams
| Cam Grind | Intake Duration | Exhaust Duration | Exhaust Cam Lift | Intake Cam Lift |
| Na/Turbo Grind (Stage 1) | 256 or 202 @ 0.050" | 256 or 202 @ 0.050" | 0.420" | 0.420" |
| NA (Stage 2) | 262 or 210 @ 0.050" | 262 or 210 @ 0.050" | 0.428" | 0.428" |
| Turbo (Stage 2) | 262 or 210 @ 0.050" | 262 or 210 @ 0.050" | 0.428" | 0.420" |
Schneider Racing Cams:
| Cam Grind | Intake Duration | Exhaust Duration | Exhaust Cam Lift | Intake Cam Lift |
| NA | 256 | 256 | 0.420" | 0.420" |
| NA | 262 | 262 | 0.420" | 0.420" |
| NA | 270 | 270 | 0.440" | 0.440" |
| NA | 280 | 280 | 0.450" | 0.450" |
| Turbo | 262 | 256 | 0.420" | 0.420" |
| Turbo | 270 | 262 | 0.440" | 0.420" |
| Turbo | 280 | 270 | 0.450" | 0.440" |
| Turbo "Race Only" | 284 | 274 | 0.450" | 0.440" |